Every ground connection protects lives
At Bativolt, grounding and equipotential bonding are never taken lightly. These invisible elements are nevertheless essential to the electrical safety of your building. We verify, measure, correct, and document each grounding point according to RGIE requirements, for optimal protection against discharges and dangerous voltages.
Grounding control
Nous mesurons la résistance de la prise de terre avec des appareils certifiés. Un bon ancrage garantit la sécurité des personnes et protège les équipements en cas de défaut. Chaque valeur est tracée et interprétée.
Verification of equipotentials
Nous contrôlons la continuité des liaisons équipotentielles principales et supplémentaires. Salles de bains, cuisines, locaux techniques : chaque point doit être raccordé selon les règles du RGIE pour éviter tout risque de tension de contact.
Electrical compliance
We ensure equipotential continuity in accordance with current standards. Our interventions respect the required distances, sections, tightenings, and control points to validate a RGIE inspection without surprises.
Results tested and plotted
Once the work is complete, we test each connection. Resistance, continuity, and tripping are all verified using calibrated devices. You receive a usable, time-stamped report, ready to be presented.
A reliable earth protects everything around you
Poorly executed grounding is one of the most critical faults in an electrical installation. At Bativolt, we control, test and reinforce your grounding and equipotential bonding with precision and method. Earth resistance, mass continuity, connection of pipes and metal structures: everything is checked and corrected according to current RGIE standards. Our expertise guarantees that each stray voltage is evacuated effectively, protecting people, sensitive equipment and the installation as a whole. Whether as part of a renovation project, a new construction , a regularization or an upcoming inspection , our reports can be used directly by an approved organization. Access our certified grounding services now, or combine this intervention with a complete verification via our certified testing and measurement service, or a global compliance.
A well-designed ground is the basis of all electrical safety.
A certified connection for your peace of mind
All grounding systems we inspect or install are measured, traced, and validated according to RGIE tolerances. Ground resistance, continuity of connections, equipotential connection points: everything is documented to avoid any surprises during a future inspection or audit.
Invisible defects that can be costly
An excessively resistant ground or a broken connection can render an RCD ineffective or endanger people. We analyze the entire installation to detect these invisible flaws and correct each critical point before an accident or failure to comply occurs.
Prepared for tomorrow's uses
Our grounding tests are designed to evolve with your future needs: installation of a heat pump, a charging station, a wet room, or home automation systems. With optimized grounding and reinforced equipotential bonding, your installation is ready for tomorrow.
Reliable land starts with accurate measurements
Chez Bativolt, nous ne nous contentons pas de poser un piquet de terre. Nous mesurons, analysons et vérifions la résistance de chaque mise à la terre et la continuité de toutes les liaisons équipotentielles. Grâce à nos instruments certifiés et étalonnés, chaque donnée est validée par un expert agréé RGIE. Que ce soit pour sécuriser une nouvelle construction, fiabiliser une rénovation ou prévenir un refus lors d’un contrôle, notre méthode garantit une conformité durable et une sécurité sans faille. Nos rapports sont traçables, clairs, exploitables immédiatement, et prêts pour tout contrôle officiel.
+1000
Measures per year
+35%
In default
+350
Improved land/year
An accurate quote, based on certified surveys
Every quote at Bativolt begins with a technical analysis of your grounding or equipotential bonding. We don't make any estimates without measurements. You receive a clear, thorough, and actionable study, without obligation, but with the same high standards as a professional report.
Vos questions sur la mise à la terre et les liaisons équipotentielles
Find answers to frequently asked questions about the role of earthing, mandatory testing, RGIE standards, safety, and situations that require your installation to be checked or brought into compliance.
When installing a new system, renovating it, adding a circuit, or when there is doubt about the safety of an existing system, measuring earth resistance is essential to ensure the proper evacuation of fault currents.
In Belgium, the RGIE generally recommends an earth resistance of less than 30 ohms for a domestic installation. Beyond this, personal safety is no longer guaranteed in the event of a fault. Each case is analyzed based on the type of RCD used.
It allows all metallic elements (pipes, reinforcements, conductive tiles, etc.) to be connected together in order to avoid dangerous potential differences. It is essential protection against the risk of indirect electrocution.
Yes. In the event of an inspection or compliance check, the earth measurement report must be time-stamped, signed by an approved professional, and included in the technical file. It may be required by an approved organization such as Vinçotte or BTV.
Typically, a grounding and equipotential bonding check takes between 30 minutes and 2 hours, depending on the complexity of the installation. The report is then sent within 48 to 72 hours.
Everything you need to know about electrical testing and compliance
They secured their installation thanks to a well-designed land
Stéphane V., Waterloo
Isabelle G., Uccle
Rachid B., Nivelles
